SciSun-300
Solar Simulator, Class AAA, 300W, 50×50mm, 2 Suns
Class: AAA (ASTM E927-19, IEC 60904-9)
Target size: 50x50mm at 2 sun
ND filter for 1 sun operation
Working distance: 380mm (with beam turning unit CTBT-3)
Power Supply: (601-300) 300W Adjustable Power with Touchscreen Control
CE compliant
300W xenon arc lamp, filter holder, height-adjustable stand, manual attenuator, manual shutter, beam turner, and testing report.
Air Mass filters AM1.0, AM1.5D, and AM1.5G.
Cressington 108auto
Sputter Coater
Auto Sputter Coater is ideally suited for high quality coating of non-conducting samples for standard SEM imaging. The added functionality of the automatic features enable fine grain coating on a range of samples with a choice of target materials. The automatic purge and leak functions offer consistent thickness for optimized conductive coating results. Cool, fine-grain sputtering is achieved with a very efficient low voltage DC magnetron head. The quick change target method allows a range of metals to be used.
Main Features
Main Features
- Fully automated or manual operation.
- Automatic vent and argon purge control. In automatic mode, the digital timer can be used to give repeatable coatings
- The efficient DC magnetron operates on a low voltage for "ultra-cool" sputtering to avoid effects on sample surface.
- Quick target change allows for a range of materials used: Au, Au/Pd, Pt, Pt/Pd.
Cressington 108auto
Sputter Coater
Auto Sputter Coater is ideally suited for high quality coating of non-conducting samples for standard SEM imaging. The added functionality of the automatic features enable fine grain coating on a range of samples with a choice of target materials. The automatic purge and leak functions offer consistent thickness for optimized conductive coating results. Cool, fine-grain sputtering is achieved with a very efficient low voltage DC magnetron head. The quick change target method allows a range of metals to be used.
Main Features
Main Features
- Fully automated or manual operation.
- Automatic vent and argon purge control. In automatic mode, the digital timer can be used to give repeatable coatings
- The efficient DC magnetron operates on a low voltage for "ultra-cool" sputtering to avoid effects on sample surface.
- Quick target change allows for a range of materials used: Au, Au/Pd, Pt, Pt/Pd.
Stanford Research-SR830
DSP lock-in amplifier
The SR830 Lock-In Amplifier provide high performance. It simultaneously displays the magnitude and phase of a signal. The instrument uses digital signal processing (DSP) to replace the demodulators, output filters, and amplifiers found in conventional lock-ins.
Specification
Specification
- 1 mHz to 102.4 kHz range
- >100 dB dynamic reserve
- 5 ppm/°C stability
- 0.01° phase resolution
- Time constants from 10 µs to 3 ks
(up to 24 dB/oct rolloff) - Auto-gain,
-phase, -reserve & -offset - Reference source
- GPIB and RS-232 interface
Keithley 2100
Digital Multimeter
The 2100 Series USB Multimeter combines high measurement basic accuracy (0.0038% ) with 6.5 digit resolution and a price often associated with 5½ -Digit DMMs. This DMM features 11 measurement functions and 8 math functions to accommodate the most commonly-measured parameters. The high precision of the 2100 Series is an unbeatable for R&D engineers, test engineers, scientists, and students making basic precision measurements.
Main Features
Main Features
- 11 measurement functions
- Fully specified accuracies on all functions
- PC software utilities for graphing and data sharing in both Microsoft® Word and Excel
- Selectable front/rear inputs.
Keithley 2100
Digital Multimeter
The 2100 Series USB Multimeter combines high measurement basic accuracy (0.0038% ) with 6.5 digit resolution and a price often associated with 5½ -Digit DMMs. This DMM features 11 measurement functions and 8 math functions to accommodate the most commonly-measured parameters. The high precision of the 2100 Series is an unbeatable for R&D engineers, test engineers, scientists, and students making basic precision measurements.
Main Features
Main Features
- 11 measurement functions
- Fully specified accuracies on all functions
- PC software utilities for graphing and data sharing in both Microsoft® Word and Excel
- Selectable front/rear inputs.
Hokuto Denko HAB 151
Potentiostat / Galvanostat
The HAB-151 is a compact standing-alone electrolyzing unit, intergrating a petentiostat, a galvanostat and a function (waveform) generator. The potentiostat /galvanostat part, provided with a capacity of 15V 1A and a current detecting range covering a minimum of 10A, has sufficient functions for normal electrolytic testing and corrosion testing. This part is equipped with three major functions:
- high-input-impedance electrometer,
- potentiostat (constant-voltage control)
- galvanostat (constant- current control)
The potentiostat / galvanostat part is provided also with alarm functions for uncontrollableness and excess voltage as well as additional convenient functions, including external control input and current- monitor noise refection filter. The waveform generating part employs an analog circuit system that assures smooth output. This part can generate lamp waves and triangular waves having a wide-range sweeping speed from 50V/sec to 10mV/ mim, with set peak voltage of - 5V to +5V. Stop, hold and reverse can be performed easily during sweep.
ScienceTech 9010
Computer Controlled Monochromator
Sciencetech's 9010 series, 200mm focal length scanning monochromators incorporate a manual selector dial with readout for wavelength selection allows for quick and accurate selection of wavelengths.
The monochromator offer full functionality afforded by motorized wavelength control and a multiple grating turret. The design features asymmetric Czerny-Turner optical layout, using up to 3 plane-ruled gratings with an f/3.5 aperture. An adjustable slit is included for the input port.
ScienceTech 9010
Computer Controlled Monochromator
Sciencetech's 9010 series, 200mm focal length scanning monochromators incorporate a manual selector dial with readout for wavelength selection allows for quick and accurate selection of wavelengths.
The monochromator offer full functionality afforded by motorized wavelength control and a multiple grating turret. The design features asymmetric Czerny-Turner optical layout, using up to 3 plane-ruled gratings with an f/3.5 aperture. An adjustable slit is included for the input port.
Carbolite CWF 12/13
Chamber Furnace
Carbolite CWF 12/13 chamber furnace is equipped with heating elements on both sides of the chamber protected by tough alumina, providing excellent uniformity and allowing heat escape compensation. The elements consist of graded wiring, allowing fast heat up and efficiency at the customer operating temperature. The chamber entrance is built with refractory material, which is sturdy and resistant, coupled with low-density thermal insulation that improves temperature profiles.
CWF 12/13 has chamber dimensions of H200 x W200 x D325 mm with a heat-up time of 80 minutes. The maximum temperature is 1200°C; however, for continuous operation, the furnace should be used at 1100°C. Total power is 3100 watts.
Main Features
Main Features
- Free radiating coiled wire elements increase uniformity
- Robust refractory insulation inside the chamber and around the entrance
- Replaceable ceramic hearth useful if leakage
- Soft Closing Door
- Door safety switch prevents electric shock
- Double-skinned construction allows convection airflow to cool the outer case
- Delayed start and process timer
- PID controller
- RS232 and RS485 communications options
Carbolite CTF 12/75/700
Tube Furnace
Carbolite CTF 12/75/700 is a horizontal single zone furnace. Maximum temperature is 1200C, with a continuous operating temperature of 1100C. Heat up time is 45 minutes. Uniform length is 265 mm plus or minus 5c. Featuring an integral wire wound work tube of 75mm internal diameter. Maximum power consumption is 3000 watts.
For inserting gases for atmosphere and applying a vacuum a separate longer work tube can be purchased for insertion into the inbuilt ceramic work tube of the furnace. The protruding ends then can have plugs, seals or gas or vacuum adaptors added. There is also a choice of tube material with different resistance properties to prevent damage for certain applications.
Soner 203H
Heated Ultrasonic Cleaner
Main Features
- Degassing function
- Industrial-level transducer
- 35 kHz, perform extraordinarily well on clean small and hard-to-reach crevices.
- Stainless steel construction
Specification
- Tank capacity: 3L
- Frequency: 35 KHz
- Timer: 1~99 min
- Heating: R.T. ~ 60°C
- Degas: Yes
- Drain: None
- Net weight: 4.1 Kg
- Tank dimension (LxWxH): 24 x 14 x 10 cm
- Overall size (LxWxH): 27 x 16 x 24 cm
- Ultrasonic power: 100W
- Heating power: 88W
Soner 203H
Heated Ultrasonic Cleaner
Main Features
- Degassing function
- Industrial-level transducer
- 35 kHz, perform extraordinarily well on clean small and hard-to-reach crevices.
- Stainless steel construction
Specification
- Tank capacity: 3L
- Frequency: 35 KHz
- Timer: 1~99 min
- Heating: R.T. ~ 60°C
- Degas: Yes
- Drain: None
- Net weight: 4.1 Kg
- Tank dimension (LxWxH): 24 x 14 x 10 cm
- Overall size (LxWxH): 27 x 16 x 24 cm
- Ultrasonic power: 100W
- Heating power: 88W
Ossila Spin Coater
The vacuum-free Ossila Spin Coater is the ideal spin coating system for busy, fast-paced labs. The machine is robust allowing everyone to implement spin coating in their research. Designed to dramatically improve the quality of thin film which can be achieved with spin coating, while also eliminating the service requirements necessary with vacuum pumps and nitrogen lines, the Ossila Spin Coater is able to produce uniform coatings with zero substrate warping. It can also be used in a glove box with ease should an inert atmosphere be required.
Specification
Specification
- Programs : 10 programs, with up to 50 steps each
- Speed stability : <2% error
- Speed : 120 to 6000 RPM
- Spin time : 1 - 999 sec
- Power supply : DC 24V 2A, via 100-240v 50/60Hz power adapter
- Safety Switch : Machanical safety switch on the door
- Dimensions : 225 x 170 x 132 mm
- Materials : Polypropylene bowl, steel casing, tempered glass lid
Ossila Spin Coater
The vacuum-free Ossila Spin Coater is the ideal spin coating system for busy, fast-paced labs. The machine is robust allowing everyone to implement spin coating in their research. Designed to dramatically improve the quality of thin film which can be achieved with spin coating, while also eliminating the service requirements necessary with vacuum pumps and nitrogen lines, the Ossila Spin Coater is able to produce uniform coatings with zero substrate warping. It can also be used in a glove box with ease should an inert atmosphere be required.
Specification
Specification
- Programs : 10 programs, with up to 50 steps each
- Speed stability : <2% error
- Speed : 120 to 6000 RPM
- Spin time : 1 - 999 sec
- Power supply : DC 24V 2A, via 100-240v 50/60Hz power adapter
- Safety Switch : Machanical safety switch on the door
- Dimensions : 225 x 170 x 132 mm
- Materials : Polypropylene bowl, steel casing, tempered glass lid